Loading A Disc; Adjusting The Volume; Turning The Source Off; Using The Rear/Guide Button - Pioneer AVIC-N3 Hardware Manual

Loading a Disc

• Insert a disc into the disc loading slot.
Format reading will start.
For DVD-Video, CD
❒ "DISC AUTO" is off in the default setting.
➲ "DISC AUTO" ➞ Operation Manual
❒ When a disc is already loaded in this prod-
uct, select the source by pressing the SRC
button.
❒ To eject a disc, press the EJECT button.
For the DVD Map Disc
❒ Inserting the Disc starts DVD navigation
mode.
❒ Removing the Disc sets Memory navi
mode.
❒ You can use the NAVI/AV button to switch
between navigation map displays and audio
operation displays.
❒ The DVD drive plays one, standard, 12-cm or
8-cm (single) disc at a time. Do not use an
adapter when playing 8-cm discs.
❒ Do not insert anything other than a disc into
the disc loading slot.
➲ Playable discs ➞ Page 6
❒ If you cannot insert a disc completely or if
after you insert a disc the disc is not recog-
nized, check that the label side of the disc is
up. Press the EJECT button to eject the disc,
and check the disc for damage before insert-
ing the disc again.
❒ If the DVD drive does not operate properly, an
error message such as ERROR-11 may be dis-
played.
➲ Error messages ➞ Operation Manual

Adjusting the Volume

• Use the VOLUME/ATT button to adjust
the audio sound level.
With this product, rotate the VOLUME/ATT
button to increase or decrease the volume.
❒ To adjust the navigation volume, go to the
navigation menu.
➲ Navigation volume adjustment ➞ Opera-
tion Manual
14

Turning the Source Off

• Press the SRC button and hold until the
source turns off.
❒ This product can be switched off by turn-
ing the ACC (ignition) OFF or detaching
the front panel.

Using the REAR/GUIDE Button

You can output the sound and video of the disc in
the built-in DVD drive to the rear display regard-
less of whether DVD drive is selected as the
source or not (REAR ON mode).
• When you have turned the REAR ON mode
on by pressing the REAR/GUIDE button,
you cannot turn it off even if you press the
SRC button and hold. In this case, press
the REAR/GUIDE button to turn the REAR
ON mode off.
• Press the REAR/GUIDE button to turn the
REAR ON mode.
The sound and video are output to the rear
display and the illumination color of the
GUIDE/REAR button changes to red.
❒ To turn the REAR ON mode off, press the
REAR/GUIDE button again.
❒ When a CD or CD-ROM is inserted, sound
only is output to the rear display.
➲ Selecting the video of rear display ➞ Oper-
ation Manual
Opening and Closing the LCD
Panel
• Do not close the LCD panel with hands by
force. This may cause malfunction.
The LCD panel will be opened or closed automati-
cally with the turning of the ignition switch on or
off. You can turn off the automatic close/open
function.
➲ Setting the automatic close/open function ➞
Operation Manual