Pioneer AVIC-N3 Hardware Manual page 14

3 Sub display
Current time or the information of the audio
source currently playing is displayed when the
LCD panel is closed.
Ambient light sensor
4
Senses ambient light. This system automatically
adjusts the brightness of the display to compen-
sate for ambient light.
FLIP DOWN/CLOCK button
5
Press to turn the LCD panel horizontal tempo-
rarily when the LCD panel is upright.
Press to turn the clock of the sub display on or off
when the LCD panel is closed.
6 OPEN/CLOSE button
Press to open or close the LCD panel.
NAVI/AV button
7
Use to switch between Navigation map displays
and audio operation displays.
8 POS button
Press to view the map or return to guidance.
Also, when the map is scrolling, pressing this
button returns you to the display of the map of
your surroundings.
Use to switch the view mode of the navigation
when the map of your surroundings is displayed.
NAVI MENU button
9
Press to display a menu of Navigation.
a RESET button
Press to return to the factory settings (initial set-
tings). Some information items are not erased.
➲ Resetting the microprocessor ➞ Page 10
b DETACH button
Press to remove the front panel from the display
unit.
c Joystick
Move to do manual seek tuning, fast forward,
reverse and track search controls, etc. Push to
display A.MENU.
EQ button
d
Press to select various equalizer curves.
e EJECT button
Press to eject a disc from this product.
12
f TRFC button
When the XM tuner is connected*:
Preset button for XM Instant Traffic & Weather
audio service. Select XM audio source, and find
appropriate Instant Traffic & Weather channel.
Hold down this button while on this channel to
assign preset.
When the XM tuner is not connected:
Not used.
➲ XM tuner (GEX-P10XMT, GEX-P920XM) ➞
Operation Manual
ANGLE (+/–) button
g
Press to change the LCD panel angle.
h WIDE/PIC ADJ button
Press to select a desired mode for enlarging a 4:3
picture to a 16:9 one.
Press and hold to enter the PICTURE
ADJUSTMENT mode.
➲ See "Changing the Wide Screen Mode" and
"Operating the Picture Adjustment" in the
Operation Mannual.
i REAR/GUIDE button
Press to output to the REAR OUT terminal the
sound and images of a disc inserted in the built-
in DVD drive that is different the currently
selected source.
➲ "Using the REAR/GUIDE Button" ➞ Page 14
Press and hold to display the Volume setting
screen. On the Volume setting screen, "Guid-
ance Volume", "Beep Volume", and "Mute
Settings" can be set.
➲ "Guidance Volume", "Beep Volume",
"Mute Settings" ➞ See "Volume" in the Oper-
ation Manual
j MEMO button
When the XM tuner is connected and the XM
source is selected*:
Press and hold this button to memorize the track
currently being played.
The beep sounds and a message is displayed
when the memorized track is playing on a station
other than the one which you are currently on. If
you press this button while the message is dis-
played, the station changes to the one playing
your track.