Philips ShowView DVDR70 Operating Instructions Manual page 34

1
In '
2
Select the desired symbol position using D or C .
3 Change the symbol at the symbol position with CH- B or CH+ A .
4
Select the next symbol position in the same way.
5
Keep pressing C until the cursor disappears.
', use D or C to select the TV system that produces the
In '
least distortion of picture and sound.
NICAM is a digital sound transmission system. Using NICAM, you can
transmit either 1 stereo channel or 2 separate mono channels. However, if
reception is poor and the sound distorted you can turn off NICAM.
In ' ', select '
To change the automatic process for storing channels (fine tuning), select
' '.
Using D or C you can try to fine-tune the TV channelmanually.
0
Press OK to store the TV channel.
A
To search for other TV channels, begin again at
B
To end, press SYSTEM-MENU .
When the automatic channel search function is activated, the TV channels are stored in a specific
order. This may differ from the order in which the TV channels appear on your TV set.
This function changes the order of the TV channels stored in your DVD recorder to match the
order on the TV set.
This only works if the DVD recorder ( EXT 1 TO TV-I/O socket) and the TV set
If your TV set supports 'Easylink,..', TV channels will be stored during initial
installation in the same order as they appear on the TV set. To store the TV
channels in a different order, you'll need to change the order on the TV set.
When you start the Follow TV function the information is transferred again
from the TV set.
1
Switch on the TV set. If required, select the programme number for
the DVD recorder.
', press C .
' using D or C .
8
.
Installing your DVD recorder
.