Aux/Sleep; Aux (Listening To An External Source); Sleep - Philips WAS700 User Manual

AUX/ SLEEP
AUX (Listening to an external
source)
You can listen to the sound of the connected
external device through your Station
1
Check the external device has been properly
connected. (See Installation, Connecting an
additional appliance)
2
Check the set is switched on or to standby (See
Basic functions, Switching on/to standby
and selecting functions, Switching to Eco
power/ on)
3
Press SOURCE once or more to select AUX
(on the remote control, press TUNER/AUX
once or more)
4
To avoid noise distor tion, turn down the volume
on your external device.
5
Press the PLAY key on the connected device to
start playback.
6
To adjust the sound and volume, use the sound
controls on your external device and the
WAS700.
32

SLEEP

You can set a certain period of time after which
the Station will switch to standby.
1
On the remote control, press SLEEP
repeatedly to select the desired time period
options (in minutes):
➜
Display shows in sequence: Sleep 15, 30,
45, 60, 90, 120, Off
➜
Display shows the selected option briefly and
returns to its previous status. The icon Z
appears.
2
To view the time countdown to the standby
mode, press SLEEP again.
To deactivate the sleep timer, press
SLEEP until Sleep Off is displayed.
or
Press STANDBY-ON/ ECO POWER to
switch the set to standby (or y on the remote
control)
Same Artist Same Genre
Z
Smart EQ