Set Up A Wireless Connection - Philips WACS4500 Connecting Manual

A

Set up a wireless connection

2
PC Access Point
1
a. On Center :
●
Press the MENU button
●
Select Settings>Network >
Wireless > (Select desired net-
work) >
(Input the encryption key by
using the 1 way remote con-
trol) > Automatic > Apply
Settings > Yes
b. On Station :
●
Repeat the same steps above or
refer to step 2 below to
connect the Station to the
Center
2
a. On Center :
● Select HD source, and then
press the MENU button
● Select Station Mgnt > Add
New Station
b. On Station :
● Press the MENU button
● Select Installation Mode
Tips:
Check that PC's wireless network adaptor is enabled
●
Locate Center closer to your wireless Access Point.
●
Make sure that DHCP is enabled on your wireless Access Point.
●
If not available, choose Static and key in IP configuration
Do you have a wireless Access Point?
YES
2
1
Center Station
1
PC
1
a. On Center :
● Press the MENU button
● Select Information > WiFi >
WEP Key to retrieve WEP key
b. On PC :
● Select Start > Control Panel >
Network Connections >
Enable Wireless Network
Connections > View Available
Wireless Networks > Select
Center's network > Input
retrieved Center's WEP key
2
a. On Center :
● Select HD source, and then
press the MENU button
● Select Station Mgnt > Add
New Station
b. On Station :
● Press the MENU button
● Select Installation Mode
NO
2
Center Station
.