Panasonic EASA-PHONE KX-T123210 Installation Manual page 81

Line ringing assignment
Intercom call
Do not disturb
Call forwarding
Call waiting
Call waiting tone
' Data line security
Dial call pickup deny
Absent message
Pickup dial
DSS parameters
Console type
Pair extension
DSS connection
DSS button assignment
Feature button assignment
Speed call
Speed access codes (00 through 99) in
which phone numbers are stored may be
printed.
All parameters
System parameters
CO parameters
Extension parameters
DSS parameters
Speed call
Operation
To stop the printout ;
1.
Dial (27).
2. Press the NEXT button
3. Repeat pressing the SELECT button until
Stop Output is displayed.
4. Press the MEMORY button.
To print System Parameters, Speed call or
All Parameters ;
1. Dial (27).
" System Data Out" will be displayed.
2. Press the NEXT button.
" Menu : All Para" will be displayed and
" All Para" will blink.
3. Repeat pressing the SELECT button until
the desired data dump mode is displayed.
4. Press the MEMORY button.
SMDR printer will print out.
5. Repeat steps 3 to 4, to print the other data
dumps.
To print CO
Parameter ;
1.
Dial (27).
2. Press the NEXT button.
3. Repeat pressing the SELECT button until
the " CO Para" is displayed.
4. Press the MEMORY button.
5.
6.
7.
" CO NO ? +" is displayed.
Dial the CO number (01 through 12).
When dialing (01)
" CO NO ? + 01" will be displayed.
Press the MEMORY button.
SMDR printer will print out.
Repeat steps 5 to 6, to print the other CO
parameter.
To print Extension Parameter ;
1.
2.
3.
4.
5.
Dial (27).
Press the NEXT button.
Repeat pressing the SELECT button until the
" EXT Para" is displayed.
Press the MEMORY button.
" Jack NO ? -+" will be displayed.
Dial the jack number (01 through 32).
When dialing (Ol),
" Jack NO ? + 01" will be displayed.
6. Press the MEMORY button.
SMDR printer will print out.
7. Repeat steps 5 to 6, to print the other jack
number.
To print DSS Parameter
;
1.
2.
3.
4.
5.
Dial (27).
Press the NEXT button.
Repeat pressing the SELECT button until the
" DSS Para" is displayed.
Press the MEMORY button.
" DSS NO ? -+I' will be displayed.
Dial the DSS number (1 or 2).
When dialing (l),
" DSS NO ? + 1" will be displayed.
6. Press the MEMORY button.
SMDR printer will print out
7. Repeat steps 5 to 6, to print the other DSS
parameter.
After completing printing, to return to the initial
mode
;
1.
Press the END button.
Programming Table
See page 7-8.
j.:
:
*
:. . .
1. .
' .
3-39