Changing The Ringing Tone Of A Co Button; Volume Control - Handset Receiver/Headset/Ringer/Speaker - Panasonic KX-T7400 Series User Manual Addendum

Changing the ringing tone of a CO button

There are eight ringer frequencies available for each CO (Loop-CO, Single-CO) button. If
you wish to change them, refer to the "Distinguishing the ringing tone for each CO button"
in the Initial Settings (Section 2 in the KX-TD208 Operating Instructions).
Volume Control — Handset Receiver/Headset/Ringer/Speaker
Allows you to adjust the following volumes as required.
– Handset Receiver volume (levels 1 through 4)
– Headset volume (levels 1 through 4)
– Ringer volume (levels 0 through 3)
– Speaker volume (levels 1 through 12)
To adjust the handset receiver volume
1
2
To adjust the headset volume
1
SP-PHONE
2
To adjust the ringer volume
– KX-T7433 and KX-T7436
1
Configuration
1. Lift the handset.
2. Rotate the Jog Dial in the desired direction.
• The display shows:
<Example>
Handset: 3
• You may also adjust the handset receiver volume during a
conversation using the handset receiver.
Be sure the headset is connected.
1. Press the SP-PHONE button.
2. Rotate the Jog Dial in the desired direction.
• The display shows:
<Example>
Headset: 3
While the telephone is ringing
1. Rotate the Jog Dial in the desired direction.
• The display shows:
<Example>
Ringer: 3
(— volume level 3)
(— volume level 3)
(— volume level 3)
11