Intercom Calling - Panasonic KX-TA1232 User Manual

Station Features and Operation (PT/SLT)

4.3.51 Intercom Calling

You can make a call to another extension user within the system or a tenant.
Using the handset
Any Telephone
Lift the handset.
Using the Speakerphone
PT
SP-PHONE
or
Press SP-PHONE
or INTERCOM.
Using a DSS (Direct Station Selection) button
PT
Lift the handset or press
SP-PHONE/MONITOR.
Conditions
• Extension Number Assignment
Extension numbers are assigned to all extensions according to [003] Extension Number Set
in the Programming Guide.
• Call Progress Tone
After dialing an extension number, you will hear one of the following tones:
Ringback tone: Indicates the destination extension is being called.
Confirmation tone: Indicates you can perform voice calling (e.g., Paging).
Busy tone: Indicates the destination extension is busy.
Do Not Disturb (DND) tone: Indicates the destination extension has set the "Do Not
Disturb (DND)" feature.
<PT>
• You can assign a DSS button on a proprietary telephone (PT) or DSS Console by Station,
User or System Programming.
• Extension names can be given to all extensions by User or System Programming. An
extension number and a name, if programmed, are shown on the display PT during an
intercom call.
158
extension no.
Dial the extension number.
INTERCOM
extension no.
Dial the extension number.
(DSS)
Press DSS
(flexible button).
Talk.
Talk. Press SP-PHONE.
Talk. Hang up or press
SP-PHONE/MONITOR.
Hang up.
SP-PHONE
User Manual