Table of Contents
Advertisement
M1341 PRODUCTION NOTES
1- #6554 LED is Rad pattern, but hand inserted. All are fixed.
2- CUT METAL PIN ON XLR #3923 AS SHOWN
3- USE POT JIG TO LINE UP POTS
4- INSERT PUSHBUTTON KNOB ON SWITCH S1 BEFORE INSERTING
INTO PCB. USE JIG AS SHOWN IN PIC. 1
5- PCBSA: DO NOT BREAK OUT BOARD BEFORE TESTING
SEE LAYOUT DIAGRAM
pt#3923
THIS CONNECTION
MUST BE BROKEN
HERE
Pushbutton Knob YS Part #8633
PIC. 1 - SEE NOTE 4
PCB Ref. S1, YS Part #3423
Advertisement
Table of Contents
