Dimensions/Weights - Trane VUV Installation, Owner Maintenance

! WARNING
Improper Unit Lift!
Test lift unit approximately 24 inches to verify proper
center of gravity lift point. To avoid dropping of unit,
reposition lifting point if unit is not level. Failure to
properly lift unit could result in death or serious injury
or possible equipment or property-only damage.
Table G1: VUVE general data
Description
Unit Length w/o end covers (inches)
Unit Depth - Standard (inches)
Unit Depth - with false back (inches)
Unit Height - Standard (inches)
Shipping Weight (Lbs.)
Nominal Filter Size and
Quantity (inches)
Dynamic Air Filter Nominal
Size (inches) & Qty.
Drain Connection Size (inches)
Fan Type / Quantity
Motor Data
Number of Fan Speeds (Standard)
If DX or electric heat used
Number of Fan Speed (ZN520)
If exhaust fan or ERSA used
If DX or electric heat used
Coil Volume (gal.)
Unit Location and Clearances
Locate the unit in an indoor area. The
ambient temperature surrounding the
unit must not be less than 45°F . Do not
locate the unit in areas subject to
freezing.
Attention should be given to service
clearance and technician safety. The
unit should contain enough space for
UV-SVN03C-EN

Dimensions/Weights/

Clearance
0750
69
16 5/8
21 1/4
30
320
14 x 20 x 1 (2)
7 x 42 x 1 (1)
7/8 ID Hose
FC / 2
Quantity 1
Horsepower (ea) 1/4
3
1
3
2
1
Coil Type A 0.178
B 0.311
C 0.311
D 0.444
E 0.444
F 0.610
G 0.610
H 0.395
service personnel to perform mainte-
nance or repair. Provide sufficient
room to make water, and electrical
connection(s). Local and national
codes should be followed in providing
electrical power connections. A 36"
clearance at the unit front is sufficient
for maintenance and service of the
equipment.
Unit Size
1000 1250
81 93
16 5/8 16 5/8
21 1/4 21 1/4
30 30
405 450
14 x 24 x 1 (1) 14 x 20 x 1 (2)
14 x 30 x 1 (1) 14 x 24 x 1 (1)
7 x 54 x 1 (1) 7 x 66 x 1 (1)
7/8 ID Hose 7/8 ID Hose
FC / 2 FC / 4
1 2
1/4 1/10
3 3
1 1
3 3
2 2
1 1
0.228 0.277
0.410 0.510
0.410 0.510
0.571 0.704
0.571 0.704
0.809 1.014
0.809 1.014
0.593 0.742
1500
105
16 5/8
21 1/4
30
470
14 x 24 x 1 (2)
14 x 30 x 1 (1)
7 x 78 x 1 (1)
7/8 ID Hose
FC / 4
2
1/10
3
1
3
2
1
0.327
0.610
0.610
0.931
0.931
1.213
1.213
0.837
7