Wireless Advanced - TP-Link TL-WR941ND User Manual

to access for Filtering Rules.
3. Delete all or disable all entries if there are any entries already.
4. Click the Add New...
/00-0A-EB-00-23-11 in the MAC Address field, then enter wireless station A/B in the
Description field, while select Enabled in the Status pull-down list. Finally, click the Save
and the Back button.
The filtering rules that configured should be similar to the following list:

4.6.4 Wireless Advanced

Choose menu "Wireless→Wireless Advanced", you can configure the advanced settings of your
wireless network.
Transmit Power - Here you can specify the transmit power of Router. You can select
High, Middle or Low which you would like. High is the default setting and is
recommended.
Beacon Interval - Enter a value between 20-1000 milliseconds for Beacon Interval here.
The beacons are the packets sent by the router to synchronize a wireless network.
Beacon Interval value determines the time interval of the beacons. The default value is
100.
button and enter
Figure 4-22 Wireless Advanced
-44-
TL-WR941ND Wireless N Router
the MAC address 00-0A-EB-00-07-8A