TP-Link TL-WR941ND User Manual page 22

3） If the connection type detected is Static IP, the next screen will appear as shown in
Figure 3-10
IP Address - This is the WAN IP address as seen by external users on the Internet
(including your ISP). Enter the IP address into the field.
Subnet Mask - The Subnet Mask is used for the WAN IP address, it is usually
255.255.255.0.
Default Gateway - Enter the gateway IP address into the box if required.
Primary DNS - Enter the DNS Server IP address into the box if required.
Secondary DNS - If your ISP provides another DNS server, enter it into this field.
5. Click Next to continue, the Wireless settings page will appear as shown in Figure 3-11.
Figure 3-9 Quick Setup – MAC Clone
Figure 3-10 Quick Setup - Static IP
-13-
TL-WR941ND Wireless N Router