Installation; Unpacking And Inspection; Mounting Precautions - EAW CF-4LZ Installation Manual

. INSTALLATION

Unpacking and Inspection

Visually inspect the outside of the shipping carton and check for any damage. After
unpacking, if you find concealed damage to the bracket, save the packing materials for
the carrier's inspection, notify the carrier immediately, and file a shipping damage claim.
Although EAW Commercial will help in any way possible, it is always the responsibility of
the receiving party to file any shipping damage claim. The carrier will help prepare and file
this claim.

Mounting Precautions

The mounting bracket is used for wall mounting the SMS4124, SMS4940, and
SMS4990 loudspeakers ONLY.
WARNING: Installation should only be done by an experienced technician. Improper
installation may result in damage to the equipment, injury or death. Make sure that
the bracket is installed in a stable and secure way in order to avoid any conditions
that may be dangerous for persons or structures:
• Check to make sure that the support surface (e.g., wall, etc.) has the necessary
mechanical characteristics to support the weight of the bracket and loudspeaker
without the danger of it falling.
• Always use support elements suitable for the material of the wall that will support
the bracket (e.g., screw anchors for bricks, screw anchors for cement, etc.). Due to
various construction methods and materials used today, the hardware for securing
the bracket to the mounting surface is not supplied. Consult a building professional
for the proper mounting hardware before mounting the bracket.
• Before mounting the bracket, carefully check all the components to be used to make
sure there is no damage, deformation, corrosion and/or missing or damaged parts
that could reduce the safety of the installation.
• Consult a professional rigger or structural engineer prior to mounting brackets and
loudspeakers from a structure not intended for that use. Always know the working
load limit of the structure supporting the loudspeaker. Always make sure that the
rigging hardware minimum rating is at least five times the actual load.
• Avoid installing the bracket in places exposed to harsh weather conditions.
5
CF-4LZ/CF-4TX–