Advertisement
Setting A Static IP Address
This will open up the IP Properties Page where you can manually enter in a "static" IP Address for your
computer communication to the UX8800's
1) Locate the "Local Connection Properties" page on your
computer (Found Under "My Computer).
2) Go to "Internet Protocol (TCP/IP). Select it and click
on "Properties".
3) Your computer will normally have the "Obtain an
IP Address Automatically" checkbox selected. We will
be setting our own IP Address manually so select the
checkbox labeled "Use The Following IP Address.
4) Now you will be able to enter in an address manually.
The first three sets of digits must all match what
you enter into the EAWPilot software and UX8800
processor(s). Use the number sequences 192 . 168 . 0
in these cells.
5) The final number will be the discrete Network IP for
the computer and hence the EAWPilot software.
The UX8800 must have a different number here
(From 001 – 256)
Advertisement
