Advertisement
Equalizer / Gain / Delay
Direct Value Adjustment
Once a greybox is installed, equalization for the channel is done on its input processor tab (A,B,C,D).
EAWPilot allows two different methods for setting equalizers. The user may elect to manually type in
all of the EQ parameters or use the associated spinners to set parameters. Alternately, you may also use
the drag and drop method within the graphical display to set EQ points.
Note: The drag and drop method can be used for coarse adjustment and then fine tuned using the
spinners or by manually typing in a value.
Graphical Display Area
Advertisement
