Address Mapping - Draytek Vigor2950 Series User Manual

3 . 3 . 4 A d d r e s
3 . 3 . 4 A d d r e s
This page is used to map specific private IP to specific WAN IP alias.
If you have "a group of IP Addresses" and want to apply to the router, please use WAN IP
alias function to record these IPs first. Then, use address mapping function to map specific
private IP to specific WAN IP alias.
For example, you have IP addresses ranging from 86.123.123.1 ~ 86.123.123.8. However,
your router uses 86.123.123.1, and the rest of the IPs are recorded in WAN IP alias. You
want that private IP 192.168.1.10 can use 86.123.123.2 as source IP when it sends packet out
to Internet. You can use address mapping function to achieve this demand. Simply type
192.168.1.10 as the Private IP; and type 86.123.123.2 as the WAN IP.
Protocol
Public IP
Private IP
Mask
Status
Click the index number link to open the configuration page.
Enable
50
s M a p p i n g
s M a p p i n g
Display the protocol used for this address mapping.
Display the public IP address selected for this entry, e.g.,
86.123.123.2.
Display the private IP set for this address mapping, e.g.,
192.168.1.10
Display the subnet mask selected fro this address mapping.
Display the status for the entry, enable or disable.
Check to enable this entry.
Vigor2950 Series User's Guide