Draytek Vigor2920 Series User Manual page 11

Interface
Factory Reset
GigaLAN (1-4)
WAN1/WAN2(Giga)
USB
PWR
ON/OFF
Description
Restore the default settings. Usage: Turn on the router (ACT LED is blinking).
Press the hole and keep for more than 5 seconds. When you see the ACT LED
begins to blink rapidly than usual, release the button. Then the router will restart
with the factory default configuration.
Connecters for local networked devices.
Connecters for remote networked devices.
Connecter for Mobile HDD, 3G Modem or printer.
Connecter for a power adapter.
Power Switch.
3
Vigor2920 Series Quick Start Guide