Rear Turn Signal And Backup Lamp - Dodge Journey 2012 Owner's Manual

Hide thumbs Also See for Journey 2012:

Table of Contents

544 MAINTAINING YOUR VEHICLE

Do not touch the new bulb with your fingers. Oil

contamination will severely shorten bulb life. If the

bulb comes in contact with an oily surface, clean the

bulb with rubbing alcohol.

4. Install the replacement bulb and connector assembly

straight into the fog lamp until it locks into place.

5. Reinstall the front lower wheel well access panel and

Rear Turn Signal And Backup Lamp

The taillamps are a two-piece design. The tail/stop/rear

turn signal lamps are located in the rear corner body

panels. The tail and backup lamps are located in the

Changing The Rear Turn Signal Lamp

1. Open the liftgate.

2. Remove the two fasteners from the inboard side of the

taillamp housing.

3. Carefully insert a trim stick (plastic flat-blade tool)

between the body panel and the outboard side of the

Table of Contents