Maintenance - Dimplex DMCS13R Owner's Manual

Operation
!
NOTE: The Main On/Off
Switch must be set to On for
the Low Heat or High Heat
Switch to operate.
The Low Heat Switch must be
in the On " I " position for the
High Heat Switch to operate.
Resetting the Temperature
Cutoff Switch
Should the heater overheat, an
automatic cut out will turn the

Maintenance

WARNINg: Disconnect
power before attempting any
maintenance or cleaning to
reduce the risk of fire, electric
shock or damage to persons.
Light Bulb Replacement
Allow at least five (5) minutes for
the light bulb and heater to cool
off before touching the bulb to
avoid accidental burning of skin.
The light bulb will need to be
replaced when the flame effect is
8
heater off and it will not come
back on without being reset. It
can be reset by switching the
Main On/Off Switch to Off and
waiting five (5) minutes before
switching the unit back on.
CAUTION: If you need to
continuously reset the heater,
unplug the unit and call
technical support at
1-888-346-7539.
no longer visible. There is one (1)
bulb under the ember bed which
generate the flames and embers.
Light Bulb Requirements
Quantity of 1 clear chandelier
or candelabra bulb with a
E-12 (small) socket base, 60
Watt rating. Example GE
60BC or Philips 60
Do not exceed 60 Watts
CTC.
www.dimplex.com