Dimplex BF33STP Parts And Service Instructions page 13

BF33ST, BF33DX, BF39ST, BF39DX, BF45ST, BF45DX
If the fireplace was operating prior to servicing allow at least 10 minutes for light bulbs
and heating elements to cool off to avoid accidental burning of skin.
Disconnect circuit power before attempting any maintenance or cleaning to reduce the
risk of electric shock or damage to persons.
TO REPLACE FLAME MOTOR/FLAME ROD
NOTE: To replace the log set re-connect the logset LED wire harness to the unit,
insert the front edge, pushing back down until the rear tab snaps under the back
ledge and the logs are resting against the mirror.
WARNING: Ensure wires do not come in contact with moving parts by securing wires in
wire wraps.
13