Advertisement
Maintenance
W ARNINg: always
disconnect from the power
supply before attempting any
maintenance.
Bulb Replacement
The bulbs are located behind the
back panel.
To gain access to the bulbs:
1.
Remove the silver screw that
secures the access panel to
the firebox as indicated in
Figure 2.
2.
Remove and slide out panel.
3.
Remove the defective lamp
by unscrewing it as shown in
Figure 3.
4.
Replace with a 60 Watt
E12 clear chandelier or
candelabra. Take care not to
over-tighten the bulb.
5.
Refit the access panel
and secure with the screw
removed in step 1.
!
NOTE: To remove the firebox
insert prior to repair, remove the
five (5) black screws at the back
of the firebox as shown in Figure
2 and slide it out to the front.
Helpful Hints
It is a good idea to replace all
light bulbs at one time if they are
close to the end of their rated life.
Group replacement will reduce
the number of times you need
to open the unit to replace light
bulbs.
Cleaning
W ARNINg: always
disconnect from the power
supply before cleaning the
fireplace.
For general cleaning use a
soft clean duster – never use
abrasive cleaners. The glass
viewing screen should be cleaned
carefully with a soft cloth. DO
NOT use glass cleaners.
To remove any accumulation
of dust or fluff the soft brush
attachment of a vacuum cleaner
should occasionally be used to
clean the outlet grill of the fan
heater.
9
Hide quick links:
Advertisement
