Vivotek FD8163 User Manual page 8

VIVOTEK
Hardware Reset
Recessed Reset
The reset button is used to reset the system or restore the factory default settings. Sometimes
resetting the system can return the camera to normal operation. If the system problems remain
after reset, restore the factory settings and install again.
Reset: Press and release the recessed reset button with a straightened paper clip. Wait for the
Network Camera to reboot.
Restore: Press and hold the recessed reset button until the status LED rapidly blinks. Note that
all settings will be restored to factory default. Upon successful restore, the status LED will blink
green and red during normal operation.
Micro SD/SDHC Card Capacity
This network camera is compliant with Micro SD/SDHC/SDXC 8GB, 16GB, 64GB and other
preceding standard SD cards.
8 - User's Manual
Int.
Button
Ext.
Reset Micro SD Card
1 2 3 4 5 6 7 8
Ethernet
NTSC
AV Out Audio In
PAL