Vivotek FD8163 User Manual page 169

mdwin0
vi
inter
weekday
begintime
endtime
lowlightcondition
<product dependent>
action_do_i<0~(ndo-1)
>_enable
action_do_i<0~(ndo-1)
>_duration
action_goto_enable
<product dependent>
action_goto_name
<product dependent>
<integer> 0
<integer> 0
1~999 1
0~127 127
hh:mm 00:00
hh:mm 24:00
0, 1 1
0, 1 0
1~999 1
<Boolean> 0
string[40] <blank>
6/6 Similar to mdwin. The parameter
takes effect when profile 1 of motion
detection is enabled.
6/6 Indicate the source id of vi trigger.
This field is required when trigger
condition is "vi".
One bit represents one digital input.
The LSB indicates VI 0.
6/6 Interval of snapshots in minutes.
This field is used when trigger
condition is "seq".
6/6 Indicate which weekday is scheduled.
One bit represents one weekday.
bit0 (LSB) = Saturday
bit1 = Friday
bit2 = Thursday
bit3 = Wednesday
bit4 = Tuesday
bit5 = Monday
bit6 = Sunday
For example, to detect events on
Friday and Sunday, set weekday as
66.
6/6 Begin time of the weekly schedule.
6/6 End time of the weekly schedule.
(00:00 ~ 24:00 sets schedule as
always on)
6/6 Switch on white light LED in low light
condition
0 => Do action at all times
1 => Do action in low-light conditions
6/6 Enable or disable trigger digital
output.
6/6 Duration of the digital output trigger
in seconds.
6/6 Enable/disable ptz goto preset
position on event triggered.
6/6 Specify the preset name that ptz goto
on event triggered.
VIVOTEK
User's Manual - 169