Vivotek IP8130 User Manual page 188

VIVOTEK
<servername>
http://
jpegtoavi.cgi
?resolution=800x600&fps=1&list='/mnt/auto/CF/NCMF/video1650.jpg', '/mnt/auto/C
F/NCMF/video1651.jpg', '/mnt/auto/CF/NCMF/video1652.jpg',
8.14 Virtual input (capability.nvi > 0)
Note: Change virtual input (manual trigger) status.
Method: GET/POST
Syntax:
http://<servername>/cgi-bin/admin/setvi.cgi?vi0=<value>[&vi1=<value>][&vi2=<value>]
[&return=<return page>]
PARAMETER VALUE
vi<num> state[(duration)nstate]
Where "state" is 0, 1. "0"
Where "nstate" is next
return <return page>
Return Code Description
200 The request is successfully executed.
400 The request cannot be assigned, ex. incorrect parameters.
Examples:
1. setvi.cgi?vi0=0(10000)1(15000)0(20000)1
2. setvi.cgi?vi3=0
188 - User's Manual
/cgi-bin/admin/
means inactive or
normal state while "1"
means active or
triggered state.
state after duration.
No multiple duration.
URL Command Document for All SeriesIP8130/31
DESCRIPTION
Ex: vi0=1
Setting virtual input 0 to trigger state
Ex: vi0=0(200)1
Setting virtual input 0 to normal state, waiting 200
milliseconds, setting it to trigger state.
Note that when the virtual input is waiting for next
state, it cannot accept new requests.
Redirect to the page <return page> after the
request is completely assigned. The <return
page> can be a full URL path or relative path
according the current path. If you omit this
parameter, it will redirect to an empty page.
73