Vivotek IP8372 User Manual page 97

■ Camera tampering detection
This option allows the Network Camera to trigger when the camera detects that is is being tampered
with. To enable this function, you need to enable the Tampering Detection function first. Please refer to
page 111 for detailed information.
■ Manual Trigger
This option allows user to enable event triggers manually by clicking the on/off button on the
homepage. Please configure 1 ~ 3 events before using this function.
3. Action
Define the actions to be performed by the Network Camera when a trigger is activated.
■ Trigger digital output for
Select this option to turn on the external digital output device when a trigger is activated. Specify the
length of the trigger interval in the text box.
■ Backup media if the network is disconnected
Select this option to backup media file on SD card if the network is disconnected. This function will only
be displayed after you set up a network attached storage (NAS).
■ Move to preset location
Select a preset location you've configured. Note that please configure Preset locations first. To know
more details, please go to page 86.
seconds
VIVOTEK
User's Manual - 97