Display Icons And Indicators; The Glowing Earpiece; Using Your Vertu Phone - Vertu Signature RM266V Reference Manual

Display icons and indicators

The display shows the current status of your Vertu phone.
The GSM signal strength indicator appears at
the top left of the display. If you are using a
3G connection you will see the 3G signal
strength indicator.
This illustration shows a strong signal.
This illustration shows that the signal strength
is weak. To obtain a stronger signal move to
an area clear of obstructions that may block
the signal.
The battery charge indicator appears at the
top right of the display.
This illustration shows a fully charged battery.
This illustration shows that the battery charge
level is low and you need to recharge your
Vertu phone soon.
Status icons are displayed below the battery charge and signal
strength indicators. The most commonly displayed icons are:
You have received one or more text messages.
You have missed a call.
You have a voice message waiting (may not be shown on all
networks).
The Flig h t profile is selected. Alternative icons are displayed
for other profiles.
Audible alerts are disabled. There is no ringing tone when you
receive a call.
Hold the SIM and SIM
drawer between your
thumb and forefinger to
ensure the SIM does not
get damaged. Insert the
SIM drawer containing the
SIM into the top of the
phone. Push it gently all
the way in, making sure it
clicks into position and the
SIM lever is set fully in on
the side of the phone.
English
The keypad is locked.
An alarm is set.
Bluetooth is switched on.
A 3G UMTS connection is active.
A GPRS connection is active.
Inaccurate time icon indicates that the displayed time has not
synchronised with the network and thus may not be correct.

The glowing earpiece

The light in the glowing earpiece flashes at different rates to indicate
the status of your Vertu phone.
In stand-by mode the light flashes slowly.
>
If you have missed a call or received a message the light flashes
>
quickly.
When you are charging your Vertu phone from the mains or
>
through your computer the light will be on permanently.

Using your Vertu phone

To help you start using your Vertu phone as quickly as possible,
please read the following information carefully.
S wi t ch i n g y o ur V ert u p ho ne o n a nd o f f
The battery may not be fully charged when you first receive your
Vertu phone. If a
B at t er y l ow
switch on your Vertu phone please see "Charging the battery" on
page 66 for more information.
5
GETTING STARTED
Press and hold the
POWER key to switch
your Vertu phone on or
off.
message is displayed when you first