Vertu Ascent RHV-3 Reference Manual page 67

01
02
With the back of your Vertu phone facing you,
>
position the back cover release key (01) very
carefully into the slot of the locking screw (02).
Ensure the key does not slip out of the slot.
03
Turn the locking screw (02) a quarter of a turn
>
anticlockwise, gently pivot (by no more than 45
degrees) and lift off the back cover (03) towards
you as shown. If you accidentally remove the back
cover while the phone is switched on, the phone
will automatically switch off.
04
Gently pivot the battery (04) from the bottom and
>
lift it upwards and outwards from your Vertu
phone.
05
If you do not re-insert the battery or insert another
>
battery right away, insert the plastic placeholder
(05) originally supplied with your Vertu phone
before replacing the cover.
Your Vertu phone will lose its date and time
settings if the battery is removed for more than
approximately two hours.
Refer to "Battery information" on page 8-59 for
more information about your battery.
Installing the Battery
01
Insert the battery (01) top end first. Ensure that the
>
contacts on the top end of the battery align with
the contact points (02) inside the battery
compartment.
02
58