Table of Contents
Advertisement
to change the separator used
Date separator
to display the date. Highlight your new date
separator then press
Automatic update of date and time
This is a network service. You can set your Vertu
phone to update the date and time from the
network when you turn the phone on. If the clock in
your phone is 30 seconds or more off the network
time, the phone will be updated automatically to
reflect the network time.
Automatic update of the date and time does not
change the time you have set for the alarm clock,
calendar, or alarm notes. These are in local time.
Updating may cause some alarms that you have set
to expire.
To use automatic date and time update:
From the stand-by display, press
>
Scroll to the
Settings
>
Scroll to
Time and date
>
Scroll to
Auto-update of date & time
>
current setting is shown, press
Scroll to one of the following options then press
>
:
Select
to update the time automatically.
On
to request confirmation before
Confirm first
updating the time. You can accept or decline the
update.
to disable automatic updates of time and
Off
date.
PERSONAL SHORTCUTS
Shortcut Menu
You can customise the shortcut list for easy
access to your favourite functions. You can modify
the items in the list and change the order in which
they as accessed.
To modify the shortcut menu list:
From the stand-by display, press
>
Scroll to the
Settings
>
Scroll to
Pers. shortcuts
>
Shortcut options
>
Scroll to one of the following options then press
>
Select
to customise the shortcut list:
to change the entries available
Select options
in the shortcut list. Check the box next to each
entry you want in the list then press
Confirm your changes when prompted.
.
Select
.
Menu
menu then press
Select
and press
Select
, the
Select
.
.
Menu
menu then press
Select
and press
Select
is highlighted, press
Select
.
Done
Organise
the shortcut list. Highlight the entry you want to
move then press
then press
modifying your list, press
changes when prompted.
Voice commands
Some of your Vertu phone's key functions can be
voice-activated. This can be particularly practical
when using the headset as it avoids you needing to
access the phone.
To add a voice command:
From the stand-by display, press
>
Scroll to the
>
Scroll to
>
Scroll to
>
.
Select the desired command folder, scroll to the
>
command for which you want to add a voice tag,
.
then press
Add command
>
Press
St art
>
activate or add a voice command during a call or
while sending or receiving data over a GPRS
connection.
To use a voice command:
From the stand-by display, press and hold
>
until
Speak now
headset, press and hold the
Say your command which should be automatically
>
recognized and performed.
CONNECTIVITY
You can also define the settings for (E)GPRS data
connections. You can then connect the phone to a
compatible PC using the data cable and use the
phone as a modem to enable GPRS connectivity
from the PC.
GPRS
Your Vertu phone can use general packet radio
.
service (GPRS) for high-speed data connections.
With GPRS, you can stay connected to the mobile
.
Internet and allow faster downloads without
.
completing a dial-up connection. GPRS connectivity
can be used to enhance MMS messaging, Web
browsing sessions, e-mail, and the PC dial-up.
GPRS is typically billed as an "always-on" function
and you are only charged for the data you transfer.
Enhanced GPRS (EGPRS), also known as EDGE
(enhanced data rates for GSM evolution) is similar
to GPRS but the connection is much faster.
to change the order of the entries in
. Select the move option
Move
. When you are finished
Select
Back
menu then press
Settings
and press
Pers. shortcuts
Voice commands
and press
.
Options
is highlighted, press
and speak after the tone. You cannot
is displayed. If using the
A N S W E R
. Confirm your
Menu
.
.
Select
.
Select
Select
.
.
Select
Go to
button.
/
E N D
39
Advertisement
Table of Contents
