Safety And Emergency Features; Seatbelts; Seatbelts - Shoulder Belt Anchor; Tire Pressure Monitoring System - Toyota TUNDRA 2010 Quick Reference Manual

If belt is fully extended, then retracted even slightly, it cannot be
re-extended beyond that point, unless fully retracted again. This feature
is used to help hold child restraint systems securely.
To find more information about seatbelts, and how to install a child
restraint system, refer to the Owner's Manual.
After adjusting tire pressures, or after tires have been rotated or
replaced, turn the ignition switch to "ON" and press and hold the
" SET" button until indicator blinks three times. Let the vehicle sit for a
few minutes to allow initialization to complete.
Refer to the load label on the door jamb or the Owner's Manual for tire
inflation specifications.
If the tire pressure indicator flashes for more than 60 seconds and then
remains on, take the vehicle to your local Toyota dealer.
: The warning light may come on due to temperature changes or
changes in tire pressure from natural air leakage. If the system has not
been initialized recently, setting the tire pressures to factory
specifications should turn off the light.
a T b
Keep as low on
B u k c e l
hips as possible
28
Push up, or squeeze
lock release to lower
1. Push and hold "
until the indicator blinks
three times.
2. Wait several minutes to allow
initialization to complete.
Take up slack
Too high
SET" button