Wireless Communication Switch - Toshiba NB250 series User Manual

USB
Legacy USB Support
Use this option to enable or disable USB Legacy Emulation. If your
operating system does not support USB, you can still use a USB mouse
and keyboard by setting the USB Legacy Emulation item to enabled.
Enabled
Disabled
LAN
Wake-up on LAN
This feature lets the computer's power be turned on from shutdown when it
receives awake-up packet ( Magic packet ) from the LAN.
Regarding Wake-up on LAN from sleep or hibernation, you must check the
"Allow the device to wake the computer" check box within the LAN Device
properties. ( This feafure does not affect the Wake-up on LAN from sleep or
hibernation. )
Enabled
Disabled
The Wake-up on LAN function consumes power even when the system is
off. Leave the AC adaptor connected while using this feature.
Do not install or remove an optional memory module while Wake-up on
LAN is enabled.
Built-in LAN
This feature enables or disables the Built-in LAN.
Enabled
Disabled

Wireless Communication Switch

This feature enables or disables the Wireless Communication Switch.
On
Off
To access BIOS setup menu, press F2 when booting up the computer.
User's Manual
Enables the USB Legacy Emulation. (Default)
Disables the USB Legacy Emulation.
Enables Wake-up on LAN from shutdown.
Disables Wake-up on LAN. from shutdown.
(Default)
Enables Built-in LAN function (Default).
Disables Built-in LAN function.
Enable Wireless Communication Switch function.
Disable Wireless Communication Switch
function.
HW Setup and Passwords
7-4