Toshiba BDX2250KC Owner's Manual page 28

Customizing the Function Settings
b. If the Blu-ray Disc™ player is connected to an
Encrypted Wireless Network, a menu similar to the
following will appear:
WiFi-me
Password
Connect WPS Pin
Press ENTER to open keyboard
Password is case-sensitive
3. Press OK(ENTER) to activate the on-screen keyboard.
Carefully enter the network password by using the
/ / to highlight the desired letter on the keyboard,
and then pressing OK. (If you make a mistake, use the
backspace key to erase the mistake.)
4. Use / / / to highlight
corner of the keyboard, and press OK to remove the
keyboard from the screen.
1 2 3 4 5 6 7 8 9 0
Done
q w e r t y u i o p
a s d f g h j k l ;
b n m , . /
z x c v
` - =
Space
5. Use to highlight Connect, and press OK. If the
wireless network is functioning,
"Connection to XXX...Success" will appear on the TV.
6. Press OK to close the message. The Blu-ray Disc™
player is now connected to the network. From now on,
when you turn on the player, it will automatically connect
to the network; there is no need to repeat these steps
again.
Notes:
• If you do not see this message, the Blu-ray Disc™ player
was not able to connect to the network.
• If the wireless network is encrypted using an
unsupported encryption (it appears in the network
list with an icon), you cannot connect to the network.
You must change the router's encryption type before
proceeding.
II. Connection to the wireless Network using Wi-Fi
protected Setup(WPS)
1. Press / to select Network in stop mode, then press
button to enter the following screen:
Wireless
Network List
WiFi Protected Setup (WPS)
Manual
IP Settings
28
a. If the Blu-ray Disc™ player is connected to a
Wireless Network Using WPS Pushbutton:
2. Press
then press OK.
Cancel
Network Name (SSID)
/
3. Press the WPS button on the top of your router.
4. Once you see "Success" on the button at the bottom of
the screen, the Blu-ray Disc™ player is connected to
on the upper-right
Done
the router.
Note: If you do not see this message, the Blu-ray Disc™
player was not able to connect to the network. Repeat
steps 1-4 again.
b. If the Blu-ray Disc™ player is connected to a
Wireless Network Using WPS PIN:
2. Press
list of existing wireless networks near the Blu-ray Disc™
[ ] ' player will appear (It may take several seconds for this
\
list to be created).
3. Press
press OK to confi rm.
icon and a message
4. Press
following screen will appear:
Password
5. Press
and press OK.
6. Follow the on-screen message to continue operating
the connection.
III. Connection to the wireless Network using Manual
IP Confi guration
1. In the "Wireless" menu, press
then press OK.
2. Follow the on-screen message to continue operating
the connection.
/ to select WiFi Protected Setup (WPS),
WiFi Protected Setup (WPS)
Please press the button on your router now
Cancel
/ to select Network List, then press OK. A
/ to select the desired wireless network, and
/ to highlight WPS PIN, and press OK. The
WiFi-me
Connect WPS Pin Cancel
Press ENTER to open keyboard
Password is case-sensitive
/ to highlight connection method you desire,
/ to select Manual,