Anonymous setting
This setting selects whether the 8360 checks the
user name and password or not when logging in.
If it is set to "ON", the 8360 does not check the user
name and password, so you can access (log in) to
the recorder with any user name and password (in-
cluding no name/password).
1. Use the JOG dial to bring up "Anonymous?" and press the
[EXECUTE/YES] key.
The current setting (ON or OFF) flashes (the default is "OFF").
SETUP
SETUP
2. Use the JOG dial to select "ON" and press the
[EXECUTE/YES] key.
The anonymous setting is completed and the display shows
"Anonymous ?".
flashing
flashing
Login name (password) setting
The login name and password are used when ac-
cessing (logging in) to the recorder from a personal
computer. The 8360 allows to set a set of the login
name and password.
<Note>
When the anonymous setting is set to "ON", you do
not have to enter the login name and password.
1. Use the JOG dial to bring up "LoginName Usr 01?" and
press the [EXECUTE/YES] key.
The display shows the screen for entering a login name,
where the leftmost digit flashes initially.
SETUP
SETUP
2. Use the shuttle to move the flashing digit and use the JOG
dial to select a character.
You can enter up to eight characters for a login name.
7
flashing
flashing