Connecting To A Personal Computer; One To One Connection - Fostex 8360 Owner's Manual

There are two types for connecting the recorder to a personal computer using the LAN cable; one to one
connection and LAN connection. The following describes how to make connection for each type.

One to one connection

To connect the recorder to a personal computer on a "one to one" basis, use a "cross cable of category 5 or
higher" for connection between the recorder and a personal computer, as shown below.
To use the ether card as an FTP server, see "TCP/IP setting (recorder's initial setting)" and "Personal com-
puter setting" described later.
D2424LV/D2424 with the ether card

Connecting to a personal computer

1
2
3
4
5
6
7
8
3
1
2
3
4
Cross cable of category 5 or higher
5
6
7
8
Personal computer with an FTP application installed
<Note>
A personal computer must be equipped
with a LAN card which works correctly.