Changing The Way You Are Warned; Speed Camera Symbols - TomTom Urban Rider Owner's Manual

Note: For average speed cameras, you are warned by a combination of icons and sounds
at the start, middle and end of the average speed check zone.
Tip: To change the number of seconds or warning sound, tap Change warning prefer-
ences in the Speed Cameras menu.

Changing the way you are warned

To change the way your TomTom Rider warns you about speed cam-
eras, tap the Change warning preferences button.
You can then set how close you want to be to a speed camera before
Change
you are warned and what type of sound will be played.
warning
preferences
For example, to change the sound that is played when you approach a
fixed speed camera, do the following:
1. Tap options in the Main Menu.
2. Tap Speed Cameras.
3. Tap Change warning preferences.
A list of speed camera types is displayed. A speaker is shown next
to the speed camera types that have been set for an alert.
4. Tap Fixed speed cameras.
5. Tap NO to avoid removing the fixed speed camera alerts.
6. Enter the time in seconds for when a warning is given before you
reach a camera. Then tap OK.
7. Tap the sound you want to be used for the warning.
Tips: To switch off warning sounds for a camera type, tap Silence in
step 7 above.
8. Tap YES to save your changes.

Speed Camera Symbols

Speed cameras are shown as symbols on the Driving View.
When you approach an area where an alert is located, you see a symbol and a warning
sound is played.
You can change both the warning sound and the number of seconds that the warning is
issued before reaching the alert.
Fixed speed camera
Mobile speed camera
56