Handling Discs - TomTom NAVIGATION SYSTEM Owner's Manual

For mazda
Hide thumbs Also See for NAVIGATION SYSTEM:
Table of Contents

Advertisement

HANDLING DISCS

• Regularly clean dust, dirt, and fingerprints from the printed side of a disc by gently wiping it
from the inside to the outside with a clean, dry cloth.
• When holding a disc, try not to touch the surface of the recorded side (under side).
• Do not adhere paper or stickers to a disc, or scratch the side in which the audio has been
recorded.
• Do not use discs which have glue of cellophane tape adhering to or peeling off the disc, or
labels which partially protrude from the edge. Otherwise, such discs may not eject or they
could cause the navigation device to malfunction.
• Discs spin around at high speed in the navigation device. Do not use cracked or extremely
warped discs as they could damage the navigation device.
• Keep discs out of direct sunlight and in their cases to prevent warping. During the summer in
particular, do not place discs on a seat or the instrument panel of your car because they will
get heated by direct sunlight to a high temperature in a closed car.
• Do not use disc cleaners or antistatic agents. In addition, use of volatile chemicals like
benzene or thinner on discs will damage them.
• A new disc may not play after inserting it into the disc slot of the navigation system. This may
happen because burrs along the centre hole or outer edge of the disc could prevent it from
setting properly. If this occurs, use the edge of a ballpoint pen or similar object to remove any
burrs before inserting the disc.
• A disc may be heated directly after it is ejected. Be careful when handling it.
* The navigation device performance or the disc itself is not affected.
92

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Navigation module

Table of Contents