Bass Multi; Vocal Multi - Fostex DE-10 Owner's Manual

• BASS MULTI

B. MULTI-1 (Normal Bass)
B. MULTI-2 (Slap Bass)
B. MULTI-3 (Fretless Bass)
B. MULTI-4 (Distortion Bass 1)
B. MULTI-5 (Distortion Bass 2)
B. MULTI-6 (Distortion Bass 3)
B. MULTI-7 (Ambience Bass Solo 1)
B. MULTI-8 (Ambience Bass Solo 2)
B. MULTI-9 (Flange Bass 1)
B. MULTI-10 (Flange Bass 2)
B. MULTI-11 (Chorus Bass)
<B. MULTI-1, 2, 3, 7, 9, 10, 11>
* [EFFECT 1_ADJUST] knob (PARAM.1):
* [EFFECT 2_ADJUST] knob (PARAM.2):
* [EFFECT 2_MIX] knob (PARAM.3):
<B. MULTI-4, 5, 6, 8>
* [EFFECT 1_ADJUST] knob (PARAM.1):
* [EFFECT 2_ADJUST] knob (PARAM.2):
* [EFFECT 2_MIX] knob (PARAM.3):
Compressor
INPUT 1
<NOTE>
When using any one of BASS MULTI settings above and no input signal is fed, you may hear an input noise. This is due
to the character of the effects. In such a case, you can reduce the noise by setting the gate to "on" (by PARAM 3).

• VOCAL MULTI

V. MULTI-1 (Normal Vocal)
V. MULTI-2 (Doubling Vocal)
V. MULTI-3 (Diffusion Vocal)
V. MULTI-4 (Distortion Vocal)
V. MULTI-5 (Flange Distortion Vocal)
V. MULTI-6 (Radio Voice)
V. MULTI-7 (Small Radio Voice)
V. MULTI-8 (Flange Voice)
<V. MULTI-1, 2, 3, 6>
* [EFFECT 1_ADJUST] knob (PARAM.1): Adjust the Modulation Level.
* [EFFECT 2_ADJUST] knob (PARAM.2): Adjust the Reverb/Delay Level.
* [EFFECT 2_MIX] knob (PARAM.3):
<V. MULTI-4, 5, 7, 8>
* [EFFECT 1_ADJUST] knob (PARAM.1): Adjust the Distortion Gain.
* [EFFECT 2_ADJUST] knob (PARAM.2): Adjust the Distortion Output.
* [EFFECT 2_MIX] knob (PARAM.3):
INPUT 1 Compressor
V. MULTI-9 (Line Select 1)
V. MULTI-10 (Line Select 2)
V. MULTI-11 (Mute)
* Parameter Settings: Non.
<NOTE>
When using any one of VOCAL MULTI settings above and no input signal is fed, you may hear an input noise. This is
due to the character of the effects. In such a case, you can reduce the noise by setting the gate to "on" (by PARAM 3).
: Normal bass sound with compression tuned for a bass.
: Slap bass sound with compression and natural modulation.
: Deeply moderated bass sound.
: Slightly distorted bass sound which stands out in the orchestra sound.
: More distorted sound than B. MULTI-4, resulting in more distinct sound.
: Distorted sound with moderate flanging effect.
: Natural bass sound. Suitable for a bass solo.
: Distorted sound with natural feeling.
: Moderate flanged bass sound.
: Deep flanged bass sound.
: Rich and spacious bass sound by adding a chorus effect. Recommended to be used with a
reverb.
Adjust the Modulation Level.
Adjust the Reverb/Delay Level.
Adjust the Gate Threshold.
Adjust the Distortion Gain.
Adjust the Distortion Output.
Adjust the Gate Threshold.
Distortion Gate
: Light compression and reverberation applied only to the high frequency range.
: Light compression and moderate short delay. Suitable for adding the brightness to a dull vocal.
: Designed for adding a chorus effect to a center positioned vocal.
: Distorted vocal sound for standing out the vocal.
: Distorted vocal sound with adding a moderate flanging effect. A unique sound can be generated.
: Typical "radio voice". Simulates a radio sound with its characteristic compression.
: Simulate a smaller radio than V. MULTI-6.
: A special voice that can be used as an effect voice.
Adjust the Gate Threshold.
Adjust the Gate Threshold.
Distortion Gate
: Input 1 routes to Output 1/L, while Input 2 routes to Output 1/R.
: Input 1 routes to Output 2/L, while Input 2 routes to Output 2/R.
: No signal is output from Output 1/2.
15
DE-10 Owner's Manual
Chorus
or Delay/Reverb
Flanger
Chorus
or Delay/Reverb
Flanger
OUTPUT 1 (L)
OUTPUT 1 (R)
OUTPUT 1 (L)
OUTPUT 1 (R)