Electrical Connections - Amana HRV-150 Installation, Operation And Maintenance Manual

Low Voltage Control Wiring Connections
* Please see instruction on individual controls for proper wiring and set up of control selected.
NEW CONNECTION PANEL
DMFC-REC
or
DMFC
RT-15M
MD-2W
or
CT-30M
MD-4W
2 wire connection
2 wire connection
24

ELECTRICAL CONNECTIONS

DMFC-REC -
This control is not
polarity sensitive,
therefore you may
connect any wire to
either positive (+) or
negative (-)
connection.
2 wire connection
RT-15M - Connect
to positive (+) and
negative (-)
DMFC -
connections on elec-
This control is not
trical panel.
polarity sensitive,
therefore you may
connect any wire to
either positive (+) or
negative (-)
connection.
Standard Accessory Control Contact
THERMOSTAT
TERMINALS
W R G
FOUR
WIRE
TWO WIRE
heating only
W
R
G
C
Y
FURNACE
24-VOLT
TERMINAL BLOCK
TWO
WIRE
Alternate Accessory Control Contact
THERMOSTAT
TERMINALS
W R G
FOUR
WIRE
TWO WIRE
heating only
W
R
WIRE JOINT
G
C
Y
FURNACE
24-VOLT
TERMINAL BLOCK
TWO
WIRE
2 wire connection
4 wire connection
Y
COOLING SYSTEM
Y
COOLING SYSTEM
MD-2W - Connect
to positive (+) and
negative (-)
connections on elec-
trical panel.
MD-4W - Connect
to positive (+) and
negative (-)
connections on elec-
trical panel.
Also connect to CUR
SW