Adjusting The Volume; Muting The Output - Teac Esoteric K-07 Owner's Manual

Adjusting the volume

You can adjust the volume of the analog audio outputs with this unit.
This is convenient when connecting the unit directly to a power
amplifier without a pre-amplifier.
Set the attenuator to ON (see p.26).
o
Press the remote control VOLUME + button to increase the volume,
and the - button to decrease it. The volume can be adjusted in
1 dB steps (-99 dB to 0 dB).

Muting the output

Press the remote control MUTE button to temporarily mute the
sound. Press again to restore the previous volume setting.
This can only be used when the attenuator function is set to ON
o
(see p.26).
V CAUTION
The volume setting is retained even when the power is turned
off. Always minimize the volume of this unit before turning on
a connected power amplifier.
Never connect this unit directly to a power amplifier when the
attenuator is set to OFF. Doing so could cause the output of
sudden loud sounds resulting in harm to hearing and speaker
damage.
29