Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Tascam CD-D11U
Summary of Contents for Tascam CD-D11U
- Page 1 CD-D11U 1x1 CD Duplicator with USB Output User’s Manual...
-
Page 3: Safety Precautions
Safety Precautions TASCAM CD Duplicator systems are high-precision electronic devices. Do not use them in any manner other than as specified in this manual. Please read this manual in its entirety before you begin the installation procedure. Use of controls, adjustments, or performance of procedures other than those specified herein may result in hazardous radiation exposure. -
Page 4: Copyright And Trademark Information
Copyright and Trademark Information Copyright © 2005 TASCAM, a division of TEAC America, Inc. All rights reserved. TEAC America, Inc. reserves the right to modify product offerings or specifications without advanced notice. No part of this publication may be reproduced in any format without the expressed written permission of TEAC America, Inc. -
Page 5: Table Of Contents
9.14 System Info ..........13 TASCAM CD-D11U User’s Manual... - Page 6 Limited Warranty ..........23 TASCAM CD-D11U User’s Manual...
-
Page 7: List Of Figures
Figure 7. Ejecting the Disc Tray ........21 TASCAM CD-D11U User’s Manual... - Page 8 TASCAM CD-D11U User’s Manual...
-
Page 9: Chapter 1. Introduction
The TASCAM 1x1 CD Duplicator is a stand-alone disc-to-disc CD Duplicator system that does not require connection to a computer. However, the TASCAM CD Duplicator does feature a USB port that enables you to transfer or record files from your computer to the duplicator’s CD-RW (target) drive. -
Page 10: Cd Duplicator Package Contents
CD Duplicator Package Contents CD Duplicator Package Contents Your TASCAM CD Duplicator package includes the following items (see Figure 1). ❑ TASCAM CD Duplicator unit ❑ AC power cable ❑ TASCAM CD Duplicator User’s Manual (this booklet) User’s Manual AC power cable TASCAM CD Duplicator unit Figure 1. -
Page 11: Front Panel
Press the Down arrow button to scroll down functions or menus. Press the ENT (Enter) button to execute a selected function. Press the ESC (Escape) button to cancel a selected function or go back to the main menu. TASCAM CD-D11U User’s Manual... - Page 12 (if the tray fails to open, you can use the emergency eject mechanism). You can close the tray by pressing the eject button. Note: TASCAM strongly recommends that you do not push the tray in to close it. Please press the eject button to eject or retract the tray.
-
Page 13: Rear Panel
Note: To ensure proper operation, use only the original AC power cable with your TASCAM CD Duplicator unit. cooling fan: Ball-bearing fan cools the CD Duplicator. RCA output jacks: Connect RCA phono plugs to these left and right stereo output jacks. - Page 14 Rear Panel TASCAM CD-D11U User’s Manual...
-
Page 15: Chapter 2. Using The Cd Duplicator
LCD display is tested. Once the initialization is complete, the CD Duplicator is ready for use. The LCD displays the Copy function by default. Figure 5. Copy Function on LCD Panel TASCAM CD-D11U User’s Manual... -
Page 16: Basic Operation
You can change the default settings by using the Advanced Setup menu. USB Mode For USB Mode, reference Chapter 3, Function 10.11 “Stand Alone and USB Modes” on page 15. TASCAM CD-D11U User’s Manual... -
Page 17: Chapter 3. Cd Duplicator Functions
3 Test & Copy This function performs the test simulation and the copy process in one step. The copy process is performed only if the simulation detects no problems. If the simulation fails, the copy process is cancelled. TASCAM CD-D11U User’s Manual... -
Page 18: Verify
8.2 Play Audio Track This function enables the source drive to function as a music player. If you connect standard multimedia speakers to the RCA audio jacks on the rear panel of TASCAM CD-D11U User’s Manual... -
Page 19: Close Session
On occasion, MAXIMUM, using the maximum writing speed will cause copy failure due to poor quality CD-R discs or unstable CD writing at high speed. In this case, TASCAM recommends that you lower the writing speeding. 9.3 Read Speed This function will set the reading speed of the target drive. -
Page 20: Auto Verify
This setting controls three writing methods: ❑ Disc At Once (DAO) ❑ Track At Once (TAO) ❑ TAO Not Close is the default setting. 9.11 Display Time This function displays the total time of each copy process. The default setting is TASCAM CD-D11U User’s Manual... -
Page 21: Button Sound
If the setting is , no messages will be displayed if an error occurs. The copy process will be completed and will include all errors found in the process. The default setting is TASCAM CD-D11U User’s Manual... -
Page 22: Burn-In
Note: The CD+G value must be set to OFF in order to use the Track Extraction features. 10.10 ISRC & MCN This function enables or disables ISRC and MCN format support. The default setting is TASCAM CD-D11U User’s Manual... -
Page 23: Stand Alone And Usb Modes
On a Macintosh computer, an icon titled “ ” will appear on the XXXXXXXX computer desktop. Note: If you have recording software installed on your computer, you will be able to record files from the computer to the CD Duplicator's target drive. TASCAM CD-D11U User’s Manual... - Page 24 USB cable from the computer. 7. Press the up arrow button. The LCD panel displays Back to SA Mode? Yes 8. Press the ENT button. The CD Duplicator unit will reinitialize, and the LCD panel will read 1. Copy TASCAM CD-D11U User’s Manual...
-
Page 25: Appendix A. List Of Functions
Read Error Skip (Default is Off) 10.4 Burn-in 10.5 Update Firmware 10.6 Compare Firmware 10.7 H/W Diagnostic 10.8 Load Default 10.9 CD+G (Default is Off) 10.10 ISRC & MCN (Default is On) 10.11 Stand Alone and USB Modes TASCAM CD-D11U User’s Manual... -
Page 26: Appendix B. Lcd Messages
All data will be lost, erase? All data on the disc will be lost. Confirm erasure of data. Erase Finished The erasing of data is complete. No Eraseable Disc in CD-RW!! The disc on the CD-RW device is not rewritable. TASCAM CD-D11U User’s Manual... -
Page 27: Audio Editing
Tgt overflow, del last trk? The disc capacity is insufficient to store the selected tracks. Do you want to delete the last track? Ins empty disc Continue? Do you want to insert a blank disc and continue copy- ing? TASCAM CD-D11U User’s Manual... -
Page 28: Appendix C. About Cd-R And Cd-Rw Discs
Remove the disc from the disc tray and place it in its protective case. Then press the Eject button again to retract the disc tray back into the drive. TASCAM CD-D11U User’s Manual... -
Page 29: Figure 7. Ejecting The Disc Tray
About CD-R and CD-RW Discs Audio Editing Press the Eject button to extend and retract the disc tray. Figure 7. Ejecting the Disc Tray TASCAM CD-D11U User’s Manual... -
Page 30: Appendix D. Specifications
AC Input: 100~240V Agency Certification FCC, UL Note: If you plan to use the TASCAM CD Duplicator with a com- puter, connect the CD Duplicator to only UL Listed IBM PC (or compatible) or Macintosh computers that feature a USB (Univer- sal Serial Bus) port, version 2.0. -
Page 31: Appendix E. Technical Support And Warranty
Please contact us at the addresses listed at the end of this warranty statement. WHAT TASCAM WILL PAY FOR – We will pay all labor and material expenses for items covered by the warranty. Payment of shipping charges is discussed in the next section of this warranty. - Page 32 Limited Warranty EXCLUSION OF DAMAGES TASCAM’S LIABILITY FOR ANY DEFECTIVE PRODUCT IS LIMITED TO REPAIR OR REPLACEMENT OF THE PRODUCT, AT TEAC’S OPTION. TASCAM SHALL NOT BE LIABLE FOR DAMAGES BASED UPON INCONVENIENCE, LOSS OF USE OF THE PRODUCT, LOSS OF TIME, INTERRUPTED OPERATION OR COMMERCIAL LOSS, LOST PROFITS OR ANY OTHER DAMAGES, WHETHER INCIDENTAL, CONSEQUENTIAL, PUNITIVE OR OTHERWISE.