Move & Paste; Moving - Fostex D-160 Owner's Manual

2. Move & Paste
The Move & Paste function "moves" sound data to the Clipboard, and
"pastes" the data in the same track or another track. You can specify the
number of repeats of the paste operation (1-99) to paste data repeatedly.
The difference between the Copy & Paste and the Move & Paste operation
is that, after the Move & Paste operation, the source data and the data on
the Clipboard will be removed. You can use this function with any Time
Base.
* To perform the Move operation, you first need to set the start point (Clipboard In point)
The data on the Clipboard will be replaced by new data each time you press the
COPY key or the MOVE key.

2-1. Moving

First, you need to specify the area to be moved (using the Clipboard In/
Out points and move track).
* The following procedure is based on data with the ABS Time Base.
* Before you start working, restore the default settings on the D-160.
* Do not change Programs or sampling rates until a session is complete.
PUNCH
IN / OUT
Entering and storing the CLIPBOARD IN point
1. Press the RECALL key, and then the CLIPBOARD IN key (or press only the
2. Move the cursor to the digit you wish to change using the HOLD/> key or the
3. After setting the value, press the STORE key, and then the CLIPBOARD IN key.
and the end point (Clipboard Out point) of the data to be moved, and the move source
track. To perform the Paste operation, you need to set the start point (Auto Punch In
point) and the paste destination point.
To change the Time Base to MTC or MIDI BAR/BEAT/CLK, press the DISP SEL key while
pressing and holding down the EXECUTE/YES key.
DIGITAL MULTITRACK RECORDER
RECORD TRACK
1/9 2/10 3/11 4/12 5/13 6/14
LOCKED HD ACCESS
7
CLIPBOARD IN key). The D-160 will enter the edit mode.
SHUTTLE dial, and change the value using the JOG dial.
The time value will be stored as the Clipboard In time, the edit mode will
disengage, and the display will return to the previous screen.
D-160 Owner's Manual (Edit function)
<Note>
1, 3
4, 6
AUTO RTN
D-160
CLIPBOARD
AUTO PLAY IN OUT
COPY MOVE PASTE
AUTO
REHEARSAL
PUNCH
TAKE
RECORD STOP
7/15 8/16 SHIFT
MTC IN CLIPBOARD PLAY
LOCATE ABS 0
LOCATE ABS END
8
91
3, 6
AUTO PUNCH
EXECUTE EXIT
START IN OUT END DISP SEL /YES
AUTO RTN TIME BASE SEL
ERASE UNDO REDO HOLD/ STORE RECALL
PGM CHANGE
LOCATE VARI PITCH
PLAY REWIND F FWD
2, 5
/NO
1, 4