Clone Track; Clean Out; Undoing Operations; Figure 2.11: Cloning Tracks - Tascam DP-01 Owner's Manual

About track editing

CLONE TRACK

This copies a track or pair of tracks to another track or pair of tracks. The IN and
OUT points do not have any meaning here.
...
There are two values that you can change:
Src. Trk
Select an individual track (
) or the stereo track.
7/8 MASTER
Dst. Trk
This sets the destination track or tracks to which the source track is
cloned. What you can select here depends on what you have selected for the
source track. If you have selected a single track, you can select tracks
here. If you have selected a pair of tracks (for instance,
8
select track pairs here.
Press to perform the operation or
YES
Although you cannot mix the inputs to the
mixed master track, you can add a drum machine (say) to the
mix in the following way:
• Mix down to the mix master track, using the
("Mixdown and mastering" on page 23) to add reverb to your mix.
RETURN
• Clone the stereo mix to a pair of tracks.
• Disconnect the drum machine from the
jacks. Make sure that it is set up to be synchronized to the DP-01
RETURN
("Working with MIDI" on page 35).
• Mix down again with only the two cloned tracks, using the
control to add and adjust the level of the drum machine. You then
RETURN
have a mix including the drum machine as well as the effect added to the
main tracks.

CLEAN OUT

This deletes all the material in a track or tracks. The IN and OUT points do not
have any meaning here.
...
There is only one value that you can change:
Src. Trk
Select an individual track (
), or all the tracks ( ).
7/8 1-8
Press to perform the operation or
YES

Undoing operations

If you have made a mistake on the DP-01, very often you can undo it! This
includes the track editing operations described here, as well as most other com-
mon operations you can perform (including recording).
...
Press the key briefly, to undo the last undoable action.
UNDO
or
...
Press and hold the
UNDO
screen:
REDO
-
C O P Y
/ R E C O R D I N G
- S T A R T
50
TASCAM DP-01 Owner's Manual
through ), a pair of tracks (
1 8
to leave this screen.
NO
EFFECT SEND
STEREO MIX
through ), a pair of tracks (
1 8
to leave this screen.
NO
key for about a second, to show the
U N D O / R E D O
←
P A S T E
U P -
, , ,
1/2 3/4 5/6
through
1
), you can only
1/2
to the
STEREO MIX
and
EFFECT
and connect it to the
EFFECT
, , ,
1/2 3/4 5/6
UNDO/
-
2
1
0

Figure 2.11: Cloning tracks

If you try to select
the same track as a
destination that you have se-
lected as the source, when you
press the key, a message will
YES
appear.
Figure 2.12: Cleaning out a
track
You must
performed at least
one undoable action after switch-
ing on for the undo function to
work!
have