Power Usage; Maintenance Instructions - Talon EG500 Owner's Manual

Talon Manual_EG500+EG600W_v3.qxp

POWER USAGE

POWER USAGE REFERENCE GUIDE
WATT LEVELS
Application Watts
Lighting:
Fluorescent Lamp 35
Light Bulb 40-100
Flood Lamp 500
Household Appliances:
Vacuum Cleaner 250-1200
Hot Water Service 2500-3500
Iron 900-1200
Kettle or Jug 1600-2400
Blender 300
Radio 60-200
Radiator 1000-2500
Refrigerator 200-500
Television Set 200-250
Toaster 750-1250
Electric Grill 1250
Electric Frying Pan 1150
Microwave 600-1000
Convection Oven 1500
Exhaust Fan 40
Washing Machine 500-3000
VCR 100
Slow Cooker 200
Freezer 700
Hairdryer 1000-1500
Fan Heater 3000
* Induction motors will require 3-5 times the rated
wattage at start-up.
23/05/2006 4:26 PM Page 13
WATT LEVELS
Application Watts
Power Tools:
Welder 140 amp 4000
9" Angle Grinder 2300
Palm Sander 175
Line Trimmer 350-1000
Jig Saw 400
Bench Grinder 400
Orbital Sander 450
Hedge Trimmer 500
4" Angle Grinder 550
1/3 HP Airless Sprayer 600
13mm Hammer Drill 600
Planer 700
5" Angle Grinder 750
Circular Saw 1000-2000
Router 1000-2000
Belt Sander 1000-2000
Cement Mixer 1320
Chain Saw 10"-16" 1500-2000
Hot Air Gun 1500
Air Compressor 2200
9" Grinder 2000
Pressure Washer 1500-2000
Other:
*Electric Induction 180
Motor ¼ hp
*Electric Induction 375
Motor ½ hp
*Electric Induction 750
Motor 1 hp
*Electric Induction 1500
Motor 2 hp
Note: Always consult the data plate on the tool
for specific electrical information.
13
MAINTENANCE

MAINTENANCE INSTRUCTIONS

Periodic maintenance and adjustment is necessary to keep the generator in good operating condition.
Perform the service and inspection at the intervals shown in the Maintenance schedule below.
WARNING
Exhaust gas contains poisonous carbon monoxide. Shut off the engine before
performing any maintenance. If the engine must be run, make sure the area is well
ventilated.
NOTE: Use only genuine Talon parts as poor quality parts may damage the generator.
REGULAR SERVICE PERIOD (3) - Performed
at every indicated month or operating hour interval,
whichever comes first.
ITEM / PIECE / PARTE
ENGINE OIL Check level
Change
AIR FILTER Check
Clean
Replace
SPARK PLUG Check-Adjust
Replace
SPARK ARRESTER Clean
VALVE CLEARANCE Check-Adjust
FUEL TANK AND STRAINER Clean
FUEL LINE Check
(Replace if necessary)
(1) Service more frequently when used in dusty areas.
(2) These items should be serviced by an authorized Talon generator dealer.
(3) For professional commercial use, log hours of operation to determine proper maintenance intervals.
Each First Every 3 Every 6 Every Year
Use Month or Months or Months or or 300Hrs
20Hrs(3) 50Hrs(3) 100Hrs(3) (3)
o
o o
o
o(1)
o
o
o
o
o(2)
o(2)
Every 2 years (2)
14