Download Print this page

Talon AB3202 User Manual

Petrol blower
Hide thumbs Also See for AB3202:

Advertisement

Quick Links

USER MANUAL
Petrol Blower
SAFETY OPERATION MAINTENANCE
WARNING • PLEASE READ
For your own safety please read this manual before attempting to operate your new unit. Failure to
follow instructions can result in serious personal injury. Spend a few moments to familiarize yourself
with your blower before each use.
MODEL NO. AB3202
9096-3202xx
WARRANTY INFORMATION
B L O W E R
The benefits conferred by this warranty are in addition to all other conditions and warranties in respect of
this product which the consumer may have taken under the Trade Practices Act 1974 or by any legislation
of a State or Territory of Australia. This product is warranted by Talon Tools Australia (ABN 12 099 520
939)(the "Company") to be free from defects in material and workmanship for a period of 24 months from
the date of original purchase. The Company during the period of the warranty, will at its option, and subject
to the conditions stated herein, repair or replace without charge this product or any component part, which
upon examination by an Authorised Service Agent or by the Company is found to be defective.
W a r r a n t y c o n d i t i o n s
This warranty will not apply:
(i) where this product has been subjected to misuse, abuse, accident or want of care;
(ii) where this product has been used for a purpose for which it was not designed or is not suited;
(iii) where the service of this product has been undertaken by a person not authorised by the Company
to carry out such work or where parts that have not been approved by the Company have been used;
(iv) where this product has been used for industrial purposes.
Should service become necessary during the warranty period, the purchaser should contact an Authorised
Service Agent or the Company. In order to obtain warranty service, the purchaser must present the store
receipt showing the name of the retailer and the date of purchase together with a completed Warranty Card.
The period of the warranty begins from the original date of purchase, notwithstanding any subsequent
repair or parts replacement. No additional warranty or guarantee other than set out in this document,
whether written or verbal, is authorised to be made on the Comapany's behalf. The purchaser shall be
responsible for delivery or causing the product to be delivered to the Compnay or the Authorised Service
Agent and the purchaser shall be responsible for all charges in connection with re-delivery of the product
and/or the delivery of parts. Damage in transit is not covered by this warranty and purchasers should
remove from the product any liquids (if applicable) before sending and pack the product securely to pre-
vent damage.
Warranty exclusions
Normal wear parts or components are subject to seperate terms as follows: Normal wear parts, compo-
nents or service required when performing normal and regular maintenance of this product are not covered
by warranty unless it is found to be defective by an Authorised Service Agent or by the Company. Normal
wear parts include, but are not limited to:
Spark Plugs.
Carburetor Adjustments.
Lubricants.
Returns based on the above listed normal wear parts will not be accepted under this warranty as they
are considered consumable items and are at the expense of the purchaser.
W A R R A N T Y
Engine Tune-ups.
Filters.
1
AU

Advertisement

loading

Summary of Contents for Talon AB3202

  • Page 1 Trade Practices Act 1974 or by any legislation of a State or Territory of Australia. This product is warranted by Talon Tools Australia (ABN 12 099 520 939)(the “Company”) to be free from defects in material and workmanship for a period of 24 months from the date of original purchase.
  • Page 2: General Safety Rules

    GENERAL SAFETY RULES Meaning of symbols marked on the product The following basic troubleshooting checks can be easily carried out to determine whether or not the unit is running correctly. If the unit will not operate after these checks then the product should be taken to an Read the user manual before using the machine.
  • Page 3: General Identification

    ASSEMBLY INSTRUCTIONS • ADJUST BACK PACK AND HARNESS GENERAL IDENTIFICATION Place blower on your back by slipping arms through • ATTACH FLEX TUBE the shoulder straps as if you were putting on a jacket Align the flex tube tab (A) with notch (B) in the hous- (Fig.
  • Page 4: Fuel And Lubrication

    FUEL AND LUBRICATION Move ignition switch to the RUN “ I ” position (A). (Fig. blower tube assembly will allow you to clear the most 4A). hard-to-reach areas (Fig. 5B). • FUEL Set throttle lock (C): While holding trigger (B) at wide The hand grip, throttle trigger and stop switch (B) are Use regular grade unleaded gasoline mixed with open position, press down and hold throttle lock (C).
  • Page 5 • FUEL CAP / FUEL FILTER CAUTION: Open fuel cap slowly to release any pressure which may have formed in the tank. Remove fuel from unit. Store fuel in approved container before performing this procedure. NOTE: Keep vent (A) on fuel cap clean of debris (Fig. 7A). Fuel Filter: Fig.