Download Print this page
Talon AB3201 User Manual

Talon AB3201 User Manual

Petrol blower vacuum

Advertisement

USER MANUAL
Petrol Blower Vacuum
SAFETY OPERATION MAINTENANCE
WARNING • PLEASE READ
For your own safety please read this manual before attempting to operate your new unit. Failure to fol-
low instructions can result in serious personal injury. Spend a few moments to familiarize yourself with
your blower before each use.
MODEL NO. AB3201
9096-320102
GENERAL SAFETY RULES
Meaning of symbols marked on the product
Read the user manual before using the machine
Wear safety goggles to protect your eyes
Wear ear protector to protect against noise
WHAT TO DO
READ YOUR USER MANUAL AND ALL SUPPLE-
MENTS (IF ANY ENCLOSED) THOROUGHLY BEFORE
OPERATING YOUR UNIT.
1. WEAR CLOSE FITTING, TOUGH WORK CLOTHING
that will provide protection, such as long slacks or
trousers, safety work shoes, heavy duty work gloves,
hard hat, a safety face shield, or safety glasses for
eye protection and a good grade of ear plugs or other
sound barriers for hearing protection.
2. REFUEL IN A SAFE PLACE. Open fuel cap slowly to
release any pressure which may have formed in fuel
tank. Always wipe unit of fuel or oil spills before start-
ing. To prevent a fire hazard, move at least 10 feet (3
meters) from fueling area before starting.
3. TURN UNIT OFF before setting it down, and also
before installing or removing attachments.
4. KEEP ALL SCREWS AND FASTENERS TIGHT and
the unit in good operating condition. Never operate
this equipment if it is improperly adjusted or not com-
pletely and securely assembled.
5. KEEP HANDLES DRY, clean and free of fuel mixture.
6. STORE EQUIPMENT AWAY FROM POSSIBLE
IGNITION SOURCES, such as gas-powered water
heaters, clothes dryers, or oil-fired furnaces, portable
heaters, etc.
7. ALWAYS KEEP the engine free of debris build-up.
8. OPERATION OF EQUIPMENT should always be
restricted to mature and properly instructed
individuals.
9. ALL PERSONS WITH RESPIRATORY PROBLEMS
and persons operating blower in very dusty environ-
ments, should wear a dust particle mask at all times.
Paper dust masks are available at most paint and
hardware stores.
WARNING: DO NOT USE ANY OTHER
FUEL than that recommended in your manu-
al. Always follow instructions in the Fuel and
Lubrication section of this manual. Never use
gasoline unless it is properly mixed with 2-
cycle engine lubricant. Permanent damage to
engine will result, voiding manufacturer's
warranty.
Wear dust mask to protect against dust
Wear glove to protect your hands
Wear safety boots to protect against electric shock
WHAT NOT TO DO
1. DO NOT SMOKE while refueling or operating equip-
ment.
2. DO NOT OPERATE UNIT WITHOUT A MUFFLER
and properly installed muffler shield.
3. DO NOT TOUCH or let your hands or body come in
contact with a hot muffler or spark plug wire.
4. DUE TO THE DANGER of exhaust fumes, never
operate blower in a confined or poorly ventilated area.
5. NEVER POINT BLOWER in the direction of people,
animals, buildings, automobiles, or windows, etc.
6. DO NOT operate unit without inlet cover installed to
prevent contact with impeller.
7. DO NOT set a hot engine down where flammable
material is present.
8. DO NOT OPERATE UNIT FOR PROLONGED PERI-
ODS. Rest periodically.
WARNING: DO NOT ADD, REMOVE OR
ALTER ANY COMPONENTS OF THIS
PRODUCT. Doing so could cause personal
injury and/or damage the unit voiding the
manufacturer's warranty.
9. DO NOT OPERATE UNIT WHILE UNDER THE
INFLUENCE OF ALCOHOL OR DRUGS.
10. DO NOT operate your unit near or around flammable
liquids or gases whether in or out of doors. An explo-
sion and/or fire may result.
11. DO NOT WEAR loose clothing, scarfs, neck chains,
unconfined long hair, and the like. Doing so could
cause injury associated with objects being drawn into
the rotating parts.
12. DO NOT refuel a running engine or an engine that is
hot
1
GB

Advertisement

loading

Summary of Contents for Talon AB3201

  • Page 1 For your own safety please read this manual before attempting to operate your new unit. Failure to fol- low instructions can result in serious personal injury. Spend a few moments to familiarize yourself with your blower before each use. MODEL NO. AB3201 9096-320102...
  • Page 2: Parts List

    GENERAL IDENTIFICATION ASSEMBLY INSTRUCTIONS • BLOWER ATTACHMENT ASSEMBLY INSTRUC- TIONS 1. Twist blower nozzle (A) clockwise into the straight blower tube (B) until tight (Fig. 1A). 2. Insert the straight blower tube (B) into the blower hous- ing (C). Align tabs (D) on tube with grooves (E) in the housing (Fig.
  • Page 3: Fuel And Lubrication

    • RECOMMENDED FUELS • STOPPING THE ENGINE smoking material such as discarded cigars or cigarettes. Do not operate unit near open flame. Emergency Stopping Procedure. When it is necessary Some conventional gasolines are being blended with oxy- genates such as alcohol or an ether compound to meet to stop blower engine immediately, DEPRESS and HOLD Do not attempt to vacuum rocks, broken glass, bottles, tin clean air standards.
  • Page 4: Air Filter

    AIR FILTER • SPARK PLUG • REMOVING A UNIT FROM STORAGE Remove spark plug. Spark plug gap = .025 in. CAUTION: NEVER operate blower without Pull starter rope briskly to clear excess oil from com- (.635mm) (Fig. 11). the air filter or dust and dirt will be sucked into bustion chamber.