Chassis Setup and Maintenance
5-1
Overview
This chapter covers the steps required to install components and perform mainte-
nance on the chassis. The only tool you will need to install components and perform
maintenance is a Phillips screwdriver. Print this page to use as a reference while
setting up your chassis.
5-2
Installation and General Maintnenance
Installation
•
Removing the Chassis Cover
•
Installing Hard Drives
•
Installing an Optional Floppy Drive or Fixed Hard Drive
•
DVD ROM Replacement or Installation
•
Installing the Motherboard (includes I/O Slot Setup)
•
Installing the Air Shroud
General Maintenance
•
System Fans
•
Replacing the Power Supply
•
Optional Front Bezel
Review the warnings and precautions listed in the manual before
!
setting up or servicing this chassis. These include information in
Chapter 2: System Safety and the warning/precautions listed in the
setup instructions.
Chapter 5: Chassis Setup and Maintenance
Chapter 5
5-1