Configuring For Configuration-3 - Supermicro SC745 User Manual

Chapter 3: Configuration and Installation

Configuring for Configuration-3

Figure 3-8. Configuration-3
Component Part B Component Part D
To configure the SC745 air shroud for an Intel Xeon DP 5500/5400/5100/5000 series
systems with a 13.68" x 13" and up to 18 memory DIMM slots form factor, use
Configuration-3. This configuration attaches component part B one slot deeper than the
edge of component part A, and mounts component part D to the underside of
component part A (see Figure 3-8).
This configuration is optimized for Supermicro X8Dxx+ / X7Dxx+ series mainboards.
NOTE: Component part C is detached from this configuration.
3-9