Configuring The Sc745 Air Shroud - Supermicro SC745 User Manual

SC745 Air Shroud User's Guide
3-4

Configuring the SC745 Air Shroud

The SC745 air shroud is customizable into three configurations for 4U Supermicro
SC745 series chassis systems (see
Configuration
Configuration-1
Configuration-2
Configuration-3
See the sections below for instruction on configuring the SC745 air shroud to these
various configurations.
NOTE: The default configuration is Configuration-1 with parts A, B, C and D
already connected.
For purposes of this section's instructions assume that all parts are
unconnected and assembly to one of the air shroud's configurations is required
for use.
Table 3-2. SC745 Air Shroud Configurations
Description
Component parts A, B, C and D for Intel Xeon DP 5500/5400/5100/5000 series
systems with 12" x 13" form factor mainboards, 6 PCI slots and 12/8/4 memory
DIMM slots (optimized for use with Supermicro X8Dxx/X7Dxx series
mainboards).
Component parts A, B, C and D for Intel Xeon DP 5500/5400/5100/5000 series
systems with 12" x 13" form factor mainboards, 7 PCI slots and 12/8/4 memory
DIMM slots (optimized for use with Supermicro X8Dxx/X7Dxx series
mainboards).
Components parts A, B, and D for Intel Xeon DP 5500/5400/5100/5000 series
systems with 13.68" x 13" form factor mainboards, 18 or 16 memory DIMM slots
(optimized for use with Supermicro X8Dxx+/X7Dxx+ series mainboards).
Table 3-2).
3-6