Care And Cleaning - Sunbeam Carveasy EK3800 Instruction Booklet

Care and Cleaning

Warning: Ensure the unit is switched off
and the plug removed from the power outlet
before removing the blades and/or cleaning.
Unlock the blades by sliding apart. Always
hold blades by the shaft end, behind the
safety guard, when handling and cleaning.
Wash the blades in hot soapy water with a
soft cloth or sponge. Rinse thoroughly and
dry completely. Do not use abrasive scouring
6
pads or powders on blades. After cleaning,
always store blades in plastic sleeves. To
clean motor housing wipe with a soft damp
cloth.
Before storing your knife, a light smear of
cooking oil or similar on the inside of the
blade is suggested.