Download Print this page

Care And Cleaning - Sunbeam Pro Steam SR4100 Instruction Booklet

Pro steam polished shot and spray iron; pro steam teflon shot and spray iron; pro steam teflon shot and spray iron with auto-off

Advertisement

Care and Cleaning

After each use
1. Turn the power off and remove the plug
from the power outlet.
2. A llow the iron to cool before winding the
cord around the built-in cord wrap.
Storage
Always store the iron on its heel rest.
NOTE: Do not store the iron with the soleplate
facing down, or in the carton.
Cleaning
To clean the exterior of your iron, wipe over
with a damp soft cloth and wipe dry.
Caution: Do not use harsh abrasives, chemical
cleaners or solvents to clean the exterior of
your iron as these will damage the surface.
8
To clean the steam holes
To remove build up from the steam holes
which may affect steam performance, use
a cotton wool tip moistened in methylated
spirits.
Cleaning the Teflon® Select non-stick soleplate
(SR4200 & SR4300)
The non-stick coating reduces sticking of
fabrics and starches to the soleplate. Do
not iron over sharp objects such as buttons,
studs and zippers, as these will scratch the
surface.
Wipe the soleplate with a damp soft cloth
after each use. If polyester has burnt to the
soleplate, iron a damp cotton cloth while hot.
Caution: Do not use scouring pads, abrasives
or harsh cleaners to clean your Teflon
non-stick soleplate, as these may scratch and
damage the surface.
Cleaning the Polished Aluminium soleplate
(SR4100)
Rub gently with a stainless steel soap pad
moistened in warm water. Wipe dry.
®
Select

Hide quick links:

Advertisement

loading