Firewall
Address group list
Address group options
FortiGate-100A Administration Guide
Note: To change the address name you must delete the address and add it again with a new
name. To avoid confusion in firewall policies, an address and a virtual IP cannot have the same
name.
4
Select OK.
To delete an address
Deleting an address removes it from the address list. To delete an address that has
been added to a policy, you must first remove the address from the policy.
1
Go to Firewall > Address > Address.
2
Select the Delete icon beside the address you want to delete.
You cannot delete default addresses.
3
Select OK.
You can organize related addresses into address groups to make it easier to
configure policies. For example, if you add three addresses and then configure them
in an address group, you can configure a single policy using all three addresses.
Note: If an address group is included in a policy, it cannot be deleted unless it is first removed
from the policy.
Figure 86: Sample address group list
The address group list has the following icons and features.
Create New
Group Name
Members
Address group options are configurable when creating or editing an address group.
Select Create New to add an address group.
The name of the address group.
The addresses in the address group.
The Delete and Edit/View icons.
01-28007-0068-20041203
Address group list
201